news center

        一、 Working principle is: control system operation molding machine, hydraulic equipment to promote material extrusion molding, high pressure carbon production ideal.

 

        二、 Energy saving and carbon powder forming machine structure.

 

       1. Feed, feed, promotion of small, labor-saving.

 

        2. The shaft seat and cylinder block are connected by steel, with high concentricity, thrust resistance and stable operation.

 

        三. Stable operation, low noise and overload protection.

 

        3、 Use one machine to install and debug the toner molding machine

 

        1. Clean the parts before installation, remove the rust of parts transported or stored for a long time, and check for damage.

 

        2. The machine can be installed correctly according to the instruction manual and tested after debugging.

 

        The lubricating parts of the testing machine should be lubricated before using oil medium. Check all bolts for looseness and tighten. Move the machine and observe whether there is any foreign body or abnormal sound. Before. And check whether the rotation direction is correct. When the machine is idle for 3 ~ 5 minutes, the feeding test can be carried out when everything is normal. The feeding of the new machine should be uniform and the humidity is moderate.

        Zhengzhou Aoxing Heavy Industry Machinery Co., Ltd. Main products: carbon powder molding machine, hookah carbon tablet press, barbecue carbon molding machine, hydraulic tablet press, hookah carbon automatic production line, rotary tablet press, hookah carbon molding machine, activated carbon production equipment, shredder, carbon powder tablet press and other molding machine machinery and equipment. Fully automatic hydraulic pipeline, stable and reliable operation, convenient operation, simple operation, long service life, products with export requirements. Product surface clean, no adhesion, zero loss. It can also be used in chemical industry and various special applications. Using this technology to produce formed charcoal has obvious advantages, which completely overcomes the shortcomings of screw molding machine, such as large investment, high cost and easy damage of key parts; the quality of carbon products is stable, and there are many kinds of products produced by this technology. Now, in addition to the general synthetic carbon for barbecue, carbon for burning and heating, carbon for ignition and carbon for industrial use; It is the future development trend to improve product quality and production efficiency. Toner molding machine is an ideal production equipment. Customers who buy in the company can learn technology and Practice for free.